Performing Linework - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Requirements

Access step-by-step

Performing Linework

The Survey application program is used here to explain Linework.

A display mask with a choicelist for Linework must be configured.

The flags for Linework must be defined in CONFIGURE Coding & Linework Settings,

Linework page.

<R-Time Mode: None> or <R-Time Mode: Rover> in CONFIGURE Real-Time Mode.

Select Main Menu: Survey to access SURVEY Survey Begin.

In SURVEY Survey Begin select a job.

Select a configuration set with <R-Time Mode: None> or <R-Time Mode:

Select an antenna.

CONT (F1) to access SURVEY Survey: Job Name.