Table of Contents
Advertisement
12
12.1
Description
Linework
Linework
Overview
Working with lines can be automated. Two ways of working are available. They are listed in
the table below. The two ways of working can be mixed.
Linework by Description
Linework
In all application programs and on the Auto page in Survey, a display mask
listbox
can be configured to show a field <Linework:> with a choicelist.
The selection from the choicelist determines
•
the action taken for a line/area, for example opening or closing a line.
•
the flag stored with a point.
The flags
•
are configured in CONFIGURE Coding & Linework, Linework page.
•
can be exported with a format file.
Coding
Line/area codes can be selected in many application programs.
Selecting a line/area code closes any open lines/area and opens a new
line/area.
Refer to "11 Coding" for more information.
The Linework flag and coding are not linked.
Additionally to Linework, thematical point, line and area codes can be used.
Quick coding can be used as per normal.
GPS1200+
267
Advertisement
Table of Contents
