Table of Contents
Advertisement
DET C SYS
Step 4: Determine Rota-
tion
Determine Coordinate System - One Point Localisa-
tion
This screen contains different fields, depending on the <Method:> selected. The explana-
tions for the softkeys given below are valid as indicated.
CONT (F1)
To confirm the selections and to continue with
the subsequent screen.
INV (F2)
Available for <Method: Two WGS84 Points>
and <Method: User Entered>. To compute an
azimuth between two local points. Refer to
"41.5 Computing Required Azimuth".
SURVY (F5)
Available when <Point 1:> or <Point 2:> are
highlighted for <Method: Two WGS84
Points> or when <WGS84 Point:> is high-
lighted for <Method: Convergnce Angle>. To
manually occupy a point and store it in
<WGS84 Pts Job:>.
GPS1200+
987
Advertisement
Table of Contents
