Table of Contents
Advertisement
COGO
Survey: Job Name,
Survey page
COGO
Points to be added to the new area can be surveyed.
OCUPY (F1)
STOP (F1)
STORE (F1)
DONE (F4)
H PNT (F5)
PAGE (F6)
GPS1200+
To start measuring the point to be added to the
area. The position mode icon changes to the
static icon. (F1) changes to STOP.
To end measuring the point. When <Auto
STOP: Yes> in CONFIGURE Point Occupa-
tion Settings, recording of positions ends
automatically as defined by the stop criteria.
The position mode icon changes to the moving
icon. (F1) changes to STORE.
To store the measured point. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
To end surveying an area and to access
COGO Edit Area: Area ID where the area can
be stored.
To measure a hidden point. Refer to "47
Survey - Hidden Points".
To change to another page on this screen.
912
Advertisement
Table of Contents
