Leica GPS1200+ Technical Reference Manual page 847

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

COGO intersection

calculation with

distance - distance

step-by-step

The following table explains the most common settings. Refer to the stated chapter for more

information on screens.

The procedure for a COGO intersection calculation with distance -

distance is very similar to a COGO intersection calculation with

bearing - bearing.

Follow the steps 1. to 5. in paragraph "COGO intersection calculation

with bearing - bearing step-by-step" The differences are:

<Method: Dist - Dist> is to be selected in COGO Intersection

Input, Input page.

For both known points <HDist-XX:> is used instead of

<Azimuth:>. The keys and advice mentioned are still valid.

P0 First known point

P1 Second known point

P2 First COGO point

P3 Second COGO point

Radius, as defined by the distance from P0 to

Radius, as defined by the distance from P1 to