Table of Contents
Advertisement
Config...\Interfaces... - General
Field
Option
<Notify Msg:> None or Binary
Next step
IF port and device for a
notification message
are not to be configured
are to be configured
Description
Activates the output of a binary notification message.
The format is LB2 v2. Documentation for LB2 is avail-
able on request from the Leica Geosystems repre-
sentative.
THEN
CONT (F1) closes the screen and returns to the screen from
where CONFIGURE Tilt Measurement was accessed.
NPORT (F4) to access CONFIGURE Choose Notification
Port. Refer to paragraph "CONFIGURE Choose Notification
Port".
GPS1200+
549
Advertisement
Table of Contents
