Table of Contents
Advertisement
22.3
22.3.1
Description
Access
Next step
Config...\Interfaces... - General
Real-Time
Overview
The real-time interface allows real-time related parameters to be configured. This includes
defining if the receiver should work as a reference or a rover and the real-time messages to
be used. Up to two real-time interfaces can be configured on the receiver.
Select Main Menu: Config...\Interfaces.... Highlight Real-Time. EDIT (F3).
OR
Press a hot key configured to access the screen CONFIGURE Real-Time Mode. Refer
to "6.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
OR
Within the configuration set wizard. Refer to "14.2 Accessing Configuration Set Manage-
ment".
Depending on the access, some options are not editable.
IF the real-time
THEN
interface is
not to be used
Refer to "22.3.2 Configuration without Real-Time Interface".
for a reference
Refer to "22.3.3 Configuration of a Reference Real-Time Interface".
for a rover
Refer to "22.3.4 Configuration of a Rover Real-Time Interface".
GPS1200+
477
Advertisement
Table of Contents
