Table of Contents
Advertisement
Equipment setup step-
by-step
Equipment Setup
e) GHT56
f) Radio in housing
Step
Description
1.
Screw the two halves of the pole together.
2.
Slide the grip onto the pole.
3.
Insert the battery into the SmartAntenna.
4.
Screw the SmartAntenna to the top of the pole.
5.
Insert the CompactFlash card into the RX1250X.
6.
Insert the battery into the RX1250X.
7.
Attach the RX1250X to the GHT56.
8.
Attach the radio in its housing to the GHT56.
9.
Screw the 90° TNC connector onto the radio housing. The 90° TNC connector is
delivered with the GHT56.
10.
Screw the radio antenna onto the 90° TNC connector.
11.
Make sure that the radio antenna is in an upright position.
12.
Place the battery into the battery compartment of the GHT56.
13.
Attach the GHT56 and tighten the screw.
14.
Press PROG on the RX1250X to switch on.
RX1250X and SmartAntenna are connected via Bluetooth.
k) RX1250X
l) Battery for radio
GPS1200+
66
Advertisement
Table of Contents
