Table of Contents
Advertisement
MANAGE
Coordinate Systems
Manage...\Coordinate Systems
Listed are all coordinate systems stored in the database DB-X. Any unavailable information
is shown as -----.
CONT (F1)
NEW (F2)
EDIT (F3)
DEL (F4)
MORE (F5)
SHIFT SET-D (F4)
GPS1200+
To select the highlighted coordinate system
and to return to the previous screen. With a
CompactFlash card inserted, the selected
coordinate system will be attached to the active
job.
To create a coordinate system manually. Refer
to "13.4.1 Creating a New Coordinate System".
To edit the highlighted coordinate system.
Refer to "13.4.2 Editing a Coordinate System".
To delete the highlighted coordinate system.
This is not possible when the highlighted coor-
dinate system is active and its source is RTCM.
To display information about the type of trans-
formation used, the type of heights computed,
the number of control points used for the deter-
mination and the date of when the coordinate
system was created.
Available unless a default coordinate system is
highlighted. To turn the highlighted coordinate
system into a user defined default coordinate
system stored in the receiver.
288
Advertisement
Table of Contents
