22.3.2
Access
CONFIGURE
Real-Time Mode
Config...\Interfaces... - General
Configuration without Real-Time Interface
Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode.
<R-Time Mode: None> means the receiver is not to be used as a real-time reference or as
a real-time rover.
Next step
IF a Space-Based Augmentation System THEN
needs to be configured
does not need to be configured
SHIFT SBAS (F5) to access CONFIGURE
SBAS Tracking Mode.
CONT (F1) returns to the screen from where
CONFIGURE Real-Time Mode was
accessed.
GPS1200+
479