Real-Time Status - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Real-Time Status

This screen shows information related to real-time data, for example the data link and the

device used to transfer real-time data.

The name of the screen changes depending on the configuration:

Real-time rover configuration:

Real-time reference configuration with one

real-time device:

Real-time reference configuration with two

real-time devices:

For simplicity, the screen is named here as STATUS Real-Time. Differences depending on

the configurations are outlined.

This screen is accessible for <R-Time Mode: Rover> and <R-Time Mode: Reference> in

CONFIGURE Real-Time Mode.

Select STATUS: Survey...\Real-Time Status.

Press a hot key configured to access the screen STATUS Real-Time. Refer to "6.1 Hot

Keys" for information on hot keys.

Press USER. Refer to "6.2 USER Key" for information on the USER key.

Tap the real-time device and real-time status icon. Refer to the GPS1200+ System Field

Manual for information on icons.

STATUS Real-Time Input

STATUS Real-Time Output

STATUS Real-Time Output 1

and STATUS Real-Time Output 2