Table of Contents
Advertisement
19.6.2
Description
Requirements
Configuration of point
occupation settings
step-by-step
Config...\Survey Settings...
Working Example
Application:
Working technique:
Aim:
<R-Time Mode: Rover> in CONFIGURE Real-Time Mode.
Step
Description
1.
Refer to "19.6.1 Configuration of Point Occupation Settings" for accessing
CONFIGURE Point Occupation Settings.
2.
CONFIGURE Point Occupation Settings
<Pt Occupation: Normal>
<Auto OCCUPY: No>
<Auto STOP: Yes>
<STOP Criteria: Positions>
<Auto STORE: Yes>
<End Survey: Manual>
3.
PARAM (F3)
•
Surveying individual points in a kinematic chain.
•
Required accuracy less than 30 mm.
Real-time kinematic
•
Press OCUPY (F1) to start recording manually.
•
Stop recording and storing points without user interaction.
•
After storing, the instrument stays in the SURVEY screen.
GPS1200+
420
Advertisement
Table of Contents
