Manage...\Data
Column
Description
•
Yes
The coordinate triplet is always included in the averaging computation
even if it would fall outside the averaging limit defined in MANAGE
New Job, Avge page or in MANAGE Edit Job: Job Name, Avge
page.
•
No
The coordinate triplet is never included in the averaging computation.
•
----
The coordinate triplet cannot be included in the averaging computation.
Automatically set by the system.
USE (F2) changes between the options.
Time
The time the measured coordinate triplet was stored.
Date
The date the measured coordinate triplet was stored. The format is as
defined in CONFIGURE Units & Formats, Time page.
dPos
The horizontal distance from the measured coordinate triplet to the
average. <dPos: ----> indicates unavailable information, for example for a
height only point.
dHt
The height distance from the measured coordinate triplet to the average.
<dHt: ----> indicates unavailable information, for example for a position
only point.
Available for measured coordinate triplets with Auto or Yes in the Use
column if <Averaging Mode: Average>. Indicates an exceeding of the
limits.
GPS1200+
184