Receiver Protection With Pin - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Receiver Protection with PIN

The receiver can be protected by a Personal Identification Number. If the PIN protection is

activated, the receiver prompts for PIN code entry after starting up and before GPS1200+

Main Menu comes up.

If a wrong PIN has been typed in five times, a Personal UnblocKing code is required.

Refer to "21.6 Start Up & Power Down" for information on activating PIN protection.

This chapter explains the workflow of entering PIN and PUK.

GPS1200+ Enter Security PIN Code is automatically accessed during starting up the

receiver when <Use PIN: Yes> in CONFIGURE Start Up & Power Down, PIN Code page

and a PIN has been defined before. Refer to "21.6 Start Up & Power Down".

GPS1200+ Enter Security PUK Code is automatically accessed during starting up the

receiver when a wrong PIN code has been typed in five times.