DET C SYS
Configuration,
Twostep page
Determine Coordinate System - General
Field
Option
User Entered
Known WGS84 Pt Height scale factor defined by a known point on the
Known WGS84 Ht Height scale factor defined by the known height of a
Next step
PAGE (F6) changes to the Twostep page. Refer to paragraph "DET C SYS Configuration,
Twostep page".
Description of fields
Field
Option
<Default Rota-
tion:>
Use WGS84 North Rotate to North as defined by WGS 1984.
User Entered
Convergnce
Angle
Description
Height scale factor can be manually typed in.
WGS 1984 datum.
point on the WGS 1984 datum.
Description
The default rotation method to be used in the trans-
formation process.
Rotation can be manually typed in.
Angle between grid North and geodetic North at a
certain point. Refer to "41.2 Determine Coordinate
System - Onestep Transformation" paragraph "DET
C SYS Step 4: Determine Rotation" for a diagram.
GPS1200+
956