Stakeout Filter; Manage - Leica GPS1200+ Technical Reference Manual

9.6.3
Description
Access step-by-step

MANAGE

Stakeout Filter

Manage...\Data
Stakeout Filter
The settings on this screen define a filter for the Stakeout application program, for example
to show points which are already staked or points that are still to be staked.
The stakeout filter acts in addition to any other filter set in MANAGE Sorts & Filters.
For example, points still to be staked out with a particular code can be filtered.
Step Description
1. Refer to "9.6.1 Sorting and Filters for Points, Lines and Areas" to access MANAGE
Sorts & Filters.
2. In MANAGE Sorts & Filters, PAGE (F6) until the Points page is active.
3. STAKE (F5) to access MANAGE Stakeout Filter.
CONT (F1)
To close the screen and return to the screen
from where this screen was accessed.
RESET (F4)
To reset the staked flag for all points of the
currently active job.
GPS1200+ 211