Table of Contents
Advertisement
Config...\Interfaces... - General
Two real-time devices can be attached to two different ports, for example a radio and a digital
cellular phone. Due to the nature of a rover, the two devices cannot operate simultaneously.
It is recommended to choose two different configuration sets, one for each real-time device.
Change the configuration set to change the active device.
Description of fields
Field
Option
<R-Time
None, Reference
Mode:>
or Rover
<R-Time
Leica
Data:>
Leica 4G
CMR/CMR+
RTCM v3.1
RTCM 1,2 v2
RTCM 9,2 v2
RTCM 18,19 v2
RTCM 20,21 v2
Description
<R-Time Data: Rover> activates a rover real-time
interface.
Refer to "22.3.3 Configuration of a Reference Real-
Time Interface" for information about these real-time
data formats.
The availability of the following options depend on the
selection made for <SBAS Tracking:> in
CONFIGURE SBAS Tracking Mode. Refer to
"22.3.6 Configuration of SBAS".
GPS1200+
494
Advertisement
Table of Contents
