Configuration Of A Reference Real-Time Interface - Leica GPS1200+ Technical Reference Manual

22.3.3
Access
CONFIGURE
Real-Time Mode
Config...\Interfaces... - General

Configuration of a Reference Real-Time Interface

Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode.
The available fields and keys on this screen depend on the selected settings.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
REF (F2)
To configure additional settings relevant to
reference, e.g. time slicing. Refer to paragraph
"CONFIGURE Additional Reference Options,
General page".
RATES (F3)
To configure the data rates for the selected
real-time data format. Refer to paragraph
"CONFIGURE Real-Time Data Rates".
SRCH (F4)
Available on RX1250 with <Port: Bluetooth
x> and a Bluetooth device being selected. To
search for all available Bluetooth devices. If
more than one Bluetooth device is found a list
of available devices is provided.
DEVCE (F5)
Available unless <Port: NETx>. To create,
select, edit or delete a device. Refer to "23.2
Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices".
GPS1200+ 480