Leica GPS1200+ Technical Reference Manual page 259

Assigning codes to a
Code Block step-by-
step
Copying a Code Block
to a new job step-by-
step
Coding
Step Description
3. PAGE (F6) until the SCode page is visible.
4. With the focus on <Code Block: 1> press enter to access SURVEY
Manage Code Blocks panel.
5. NEW (F2) to create a new code block.
Code blocks can only be created or deleted in SURVEY Manage
Code Blocks panel.
6. CONT (F1) to return to SURVEY Survey: Job Name, SCode page.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to paragraph "Creating a Code Block step-by-step" to access
SURVEY Survey: Job Name, SCode page.
2. Move the focus on a code box.
3. CODES (F4) to select a code to be assigned to the highlighted code
block.
To create a new code to be assigned refer to "Creating a New Code". 10.5.2
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
GPS1200+
Refer to
chapter
Refer to
chapter
259