Exporting Data In Dxf Format - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver
Hide thumbs Also See for GPS1200+:
Table of Contents

Advertisement

16.5
General
Access
Export data step-by-
step
Convert...\Export Data from Job

Exporting Data in DXF Format

Data can be exported to a DXF file in the \DATA directory of the CompactFlash card or the
internal memory, if fitted.
Refer to "16.2 Accessing the Data Export Functionality" to access EXPORT Export DXF
from Job.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
EXPORT Export DXF from Job
<Job:> All jobs from Main Menu: Manage...\Jobs can be selected. When in this
choicelist press CFCRD (F6) or INTL (F6) to select a job from a different memory
device.
<Coord System:> The coordinate system currently attached to the selected
<Job:>.
<File name:> The name of the file to which the data should be exported. The
name is automatically suggested based on the job name to be exported and the
extension dxf.
Select the job to be exported and enter an individual file name or accept the
suggested name.
CONF (F2) accesses Configuration, Export page.
<Points:> Defines if points are exported.
<Lines:> Defines if lines are exported.
GPS1200+
353

Advertisement

Table of Contents
loading

Table of Contents