Table of Contents
Advertisement
Determine Coordinate System - General
Next step
IF
AND
<Method:
the DET C SYS
Normal>
application
program needs
configuring
<Method: One
the DET C SYS
Pt Localistn>
application
program needs
configuring
<Method:
the DET C SYS
Normal>
application
program does not
need configuring
<Method: One
the DET C SYS
Pt Localistn>
application
program does not
need configuring
THEN
CONF (F2) to access DET C SYS Configuration.
Refer to "39.3.1 Configuring Determine Coordinate
System - Normal".
CONF (F2) to access DET C SYS Configuration.
Refer to "39.3.2 Configuring Determine Coordinate
System - One Point Localisation".
CONT (F1) to access DET C SYS Step 1: Choose
Transform Type. Refer to "40 Determine Coordinate
System - Normal".
CONT (F1) to access DET C SYS Step 1: Choose
Transform Type. Refer to "41 Determine Coordinate
System - One Point Localisation".
GPS1200+
946
Advertisement
Table of Contents
