Leica GPS1200+ Technical Reference Manual page 829

COGO
Step Description
<Offset:> Available for <Use Offsets: Yes> in COGO Configura-
tion, Parameters page. The offset of the COGO point from the line
of direction. A positive offset is to the right, a negative offset is to the
left.
Type in the azimuth, the distance and the offset, if required.
The values for the azimuth, the distance and the offset can be calcu-
lated from two existing points.
INV (F2) when <Azimuth:>, <HDist-XX:> or <Offset:> is highlighted.
To perform a COGO inverse calculation.
Upon pressing STORE (F1) in COGO Inverse, the result from
the COGO inverse calculation is copied to the field which was
highlighted when INV (F2) was pressed.
For <Write Logfile: Yes> in COGO Configuration, Logfile
page the result of the COGO inverse calculation is written to
the logfile.
The values for the azimuth, the distance and the offset can be
selected from previous COGO inverse calculations.
LAST (F4) when <Azimuth:>, <HDist-XX:> or <Offset:> is high-
lighted. To recall previous results from COGO inverse calculations.
Upon pressing CONT (F1) in COGO Last Inverse Calculations, the
selected result is copied to the field which was highlighted when
LAST (F4) was pressed.
GPS1200+
Refer to
chapter
38.4
38.12
829