Table of Contents
Advertisement
Linework
Field
Option
ReOpen Last Line Opens the last used line again. The last code used
End Line
Cont Line/Area
Start Spline
End Spline
Cont Spline
Begin Area
ReOpen Any Area Opens an area from a list of all lines which are
ReOpen Last Area Opens the last used area again. The last code used
Description
with the reopened line is automatically selected when
the point is stored.
Closes all open lines.
Indicates a line/area is open.
Stores the linework flag for beginning a spline and
continues any open line/area.
Closes a spline and continues any open line/area.
Indicates a line/area is open with spline line type.
Opens a new area when the next point is stored. Any
line/area which is currently open is closed and the last
point belonging to that line/area is given the
End Line/Close Area linework flag. The point may or
may not be stored with a point code.
currently stored in the job when the next point is
stored. The last code used with the reopened area is
automatically selected when the point is stored.
Any line/area which is currently open is closed and
the last point belonging to that line/area is given the
End Line/Close Area linework flag.
with the reopened area is automatically selected
when the point is stored.
GPS1200+
271
Advertisement
Table of Contents
