Table of Contents
Advertisement
22.10
Description
Establish connection
automatically
Config...\Interfaces... - General
SmartAntenna
The SmartAntenna interface is used to send the measurement data from the SmartAntenna
to the RX1250.
The settings on this screen define the port and the device through which a connection to the
SmartAntenna should be established.
The configuration of a SmartAntenna interface is only possible for RX1250.
Automatic connection
Establishing a connection is initiated automatically upon
switching on RX1250.
OR
double clicking the icon
software.
Requirements
The SmartAntenna interface is configured such that SmartAntenna is being used via
Bluetooth.
AND
An <ID Address:> is available.
AND
A SmartAntenna is found that matches <ID Address:> configured. This can be the last
used <ID address:>.
If one of these requirements is not fulfilled, a search for a SmartAntenna is performed.
on Windows CE desktop to display the Leica SmartWorx
GPS1200+
552
Advertisement
Table of Contents
