Table of Contents
Advertisement
CONFIGURE
Tilt Measurement
Config...\Interfaces... - General
Description of fields
Field
Option
<Use Device:> Yes or No
<Data Rate:>
From 0.05s to
3600.0s
<Log to File:> Yes or No
CONT (F1)
NPORT (F4)
DEVCE (F5)
Description
Activates the tilt interface.
The rate at which data is requested from the tilt
device.
To store measurements from the tilt device. Data is
logged into the same job and file where the GPS raw
observations are logged. No data is logged, unless
raw observation logging is active.
For an active ring buffer on a GRX1200+ or
GRX1200+ GNSS, the measurements are also
stored to the ring buffer files.
GPS1200+
To accept changes and return to the screen
from where this screen was accessed.
Available for <Notify Msg: Binary>. To
configure the port and the device through
which the notification message shall be trans-
mitted. Refer to paragraph "CONFIGURE
Choose Notification Port".
Available unless <Port: NETx>. To create,
select, edit or delete a device. Refer to "23.2
Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices".
548
Advertisement
Table of Contents
