Table of Contents
Advertisement
Convert...\Import Data to Job
Step
Description
<No. Lines/Pt:> Available for <Delimiter: Line Feed>. The number of lines used
to describe each point.
Select the delimiter and the positions of the particular variables.
DEFLT (F5) recalls the default ASCII import settings.
4.
CONT (F1) leads back to IMPORT Import ASCII/GSI Data to Job
5.
SHIFT HTS (F2) to access IMPORT Define Ht Type & Easting Import.
6.
IMPORT Define Ht Type & Easting Import
<Import as:> The height type for the imported data.
<Easting:> The Easting can be imported as written in the ASCII file or it can be
multiplied by -1. This is required by some coordinate systems.
7.
CONT (F1) leads back to IMPORT Import ASCII/GSI Data to Job
8.
CONT (F1) imports the data.
Points with a height > 20000 m are not imported.
9.
Information message: Are more data to be imported?
•
If yes, continue with step 10.
•
If no, continue with step 11.
10.
YES (F6). Repeat steps 1. to 9.
11.
NO (F4) returns to the GPS1200+ Main Menu.
GPS1200+
366
Advertisement
Table of Contents
