STATUS
Satellites: Rover,
GPS page
STATUS
CONT (F1)
ROV / REF (F3)
HELTH (F4)
MORE (F5)
PAGE (F6)
GPS1200+
To exit STATUS Satellites.
To change between the signal to noise ratio
values of rover and reference.
Available for <R-Time Mode: Rover> config-
ured in CONFIGURE Real-Time Mode.
To view the numbers of satellites categorised
in good, bad and unavailable.
To display information about the signal to noise
ratio values for GPS satellites (if <GPS L5:
Yes> is configured in CONFIGURE Satellite
Settings) and Galileo satellites. Not available
on the GLO page, Skyplot page or Almanac
page.
To change to another page on this screen.
678