Table of Contents
Advertisement
Access
COGO
Match Common Points
(n)
COGO
Refer to "38.2 Accessing COGO" to access COGO Match Common Points (n).
This screen provides a list of points chosen from the active job. The points are used for the
determination of the 2D Helmert transformation. The number of points matched is indicated
in the title, for example COGO Match Common Points (3). Unless there is no pair of
matching points in the list all softkeys are available. Refer to paragraph "Match points step-
by-step" for information on how to match points.
CALC (F1)
NEW (F2)
EDIT (F3)
DEL (F4)
MATCH (F5)
GPS1200+
To confirm the selections, compute the trans-
formation and continue with the subsequent
screen.
To match a new pair of points. This pair is
added to the list. A new point can be manually
occupied. Refer to paragraph "Match points
step-by-step".
To edit the highlighted pair of matched points.
To delete the highlighted pair of matched
points from the list.
To change the type of match for a highlighted
pair of matched points. Refer to "Description of
columns".
898
Advertisement
Table of Contents
