Accessing Cogo - Leica GPS1200+ Technical Reference Manual

38.2
Access
COGO

Accessing COGO

Select Main Menu: Programs...\COGO.
OR
Press PROG. Highlight COGO. CONT (F1). Refer to "37.2 Accessing the Application
Programs Menu" for information on the PROG key.
OR
Press a hot key configured to access the screen COGO COGO Begin. Refer to "6.1 Hot
Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
The screens for each COGO calculation method can be accessed directly by pressing a
configured hot key or USER where COGO COGO Begin is not accessed. The currently
active configuration set and job are used.
GPS1200+ 789