Leica GPS1200+ Technical Reference Manual page 523

Config...\Interfaces... - General
Step Description
2. CONFIGURE ASCII Input
<Use Device: Yes>
<Port:> Select the port to which the depth sounder is connected.
<End of Msg: CR>
3. ANNOT (F2)
4. CONFIGURE Annotations to be Used
<Annotation: Annotation 1>
<Accept ASCII: Yes>
<Message Desc: Depth Sounder>
<Message ID: ----->
<Use Prefix: None>
<Send Reply: No>
5. Still in CONFIGURE Annotations to be Used
<Annotation: Annotation 2>
<Accept ASCII: No>
6. Repeat step 5. for <Annotation: Annotation 3> and <Annotation: Annotation
4>.
7. CONT (F1) closes the screen and returns to CONFIGURE ASCII Input.
8. CONT (F1) returns to the screen from where CONFIGURE ASCII Input was
accessed.
GPS1200+ 523