Table of Contents
Advertisement
CONFIGURE
Real-Time Stop Criteria
Config...\Survey Settings...
Description of fields
The parameters shown on this screen depend on the setting for <STOP Criteria:> in
CONFIGURE Point Occupation Settings.
Field
Option
<Pos Quality
User input
<:>
and
<Ht Quality <:>
<Positions:>
User input
CONT (F1)
Description
Sets the maximum position and height qualities for
each point occupation. Calculating the qualities starts
when OCUPY (F1) is pressed. The receiver stops
measuring when the position and height qualities are
both less than the configured values.
Raw data is logged for a minimum number of posi-
tions even when the <Pos Quality <:> and <Ht
Quality <:> is already less than the specified
maximum.
GPS1200+
To accept changes and to return to
CONFIGURE Point Occupation
Settings.
417
Advertisement
Table of Contents
