Procedure Of Updating Setups - Leica GPS1200+ Technical Reference Manual

34.2
Access
XX
CONFIRMATION: 1100
Update Setups

Procedure of Updating Setups

XX CONFIRMATION: 1100 is automatically accessed when
a TPS1200+ setup with an unknown backsight point exists on the CompactFlash card in
a GPS1200+ receiver
AND
the same point ID of the unknown backsight point is assigned to a point measured with
GPS1200+.
Next step
VIEW (F3) views all setups using the unknown backsight and accesses GPS1200+ Update
Setups with new BS. Refer to paragraph "GPS1200+ Update Setups with new BS, Setups
page".
VIEW (F3)
To view all setups from TPS1200+ using the
unknown backsight point whose point ID has
been assigned to a point measured with
GPS1200+.
NO (F4)
To return to the screen from where this screen
was accessed without updating any setup from
TPS1200+ using the unknown backsight point.
YES (F6)
To update all setups from TPS1200+ using the
unknown backsight point and to return to the
screen from where this screen was accessed.
GPS1200+ 763