Leica GPS1200+ Technical Reference Manual page 190

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Creating lines/areas

most efficiently

Manage...\Data

The value for <Start Time:> with which the line is stored is the time

when STORE (F1) was pressed. The same value is assigned to the

value for <End Time:> until a point is added to the line.

Any existing lines and areas which are open are closed.

IF the task is to

multiple lines/areas

use the hot key/user menu function FUNC Create New Line

with subsequent

(Quick)/FUNC Create New Area (Quick). Pressing the hot key or

line/area ID's

selecting the function from the user menu creates and immediately

stores the new line/area. For the line/area ID, the line/area ID

template as defined in CONFIGURE ID Templates is used. The

code and attributes are taken over from the last created line/area.

lines/areas with

use quick coding. The job codelist must contain quick codes for

certain codes

lines/areas. By tying the quick code a new line/area is created and

immediately stored with that line/area code and attributes. For the

line/area ID, the line/area ID template as defined in CONFIGURE ID

Templates is used.