Table of Contents
Advertisement
1.12
Use
Description
Equipment Setup
Real-Time Rover, Pole and Minipack
The equipment setup described below is to be used for real-time rover with extended periods
of use in the field. Raw observation data may also be collected for post-processing.
The radio attaches to the receiver and is placed in the minipack. Connections are made to
the GNSS antenna, radio antenna and RX1200. The cables coming from the minipack can
be disconnected in the event that an obstacle such as a fence has to be crossed.
•
GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-
dures may vary slightly.
•
Aluminium poles are used. They may be replaced with their carbon fibre equivalent
without any change to these instructions.
•
Standard radio mounted in radio housing is used throughout the instructions. Digital
cellular phones may also be used but the setup may differ slightly.
GPS1200+
72
Advertisement
Table of Contents
