Table of Contents
Advertisement
COGO inverse calcula-
tion point - current posi-
tion step-by-step
COGO
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Refer to "38.2 Accessing COGO" to access COGO Inverse.
COGO Inverse Pt - Current Pos, Inverse page
SHIFT CONF (F2) to configure the COGO application program.
2.
COGO Inverse Pt - Current Pos, Inverse page
<From:> The point ID of the current position for the COGO calcula-
tion.
<To:> The point ID of the second known point for the COGO calcula-
tion.
REVRS (F3) to switch the options of the fields <From:> and <To:>.
Select the points to be used.
SURVY (F5) when <From:> or <To:> is highlighted. To manually
occupy a point for the COGO calculation.
For all point fields, the MapView interactive display on the Map page
can be used to select the desired point.
To type in coordinates for a known point open the choicelist when
<From:> or <To:> is highlighted. Press NEW (F2) to create a new
point.
3.
COGO Inverse Pt - Current Pos, Inverse page
The COGO calculation results are displayed on the same page.
GPS1200+
Refer to
chapter
38.3
45.3
33.5
9.3.2
38.4.4
822
Advertisement
Table of Contents
