Leica GPS1200+ Technical Reference Manual page 42

Geodetic satellite receiver
Hide thumbs Also See for GPS1200+:
Table of Contents

Advertisement

Equipment Setup
Step
Description
13.
Draw the required amount of cable out of the minipack and tighten the cable brake.
14.
Connect one end of the 1.2 m antenna cable to the loose end of the 1.6 m antenna
cable and the other end to the GNSS antenna.
15.
Connect the 1.8 m, RX to GX cable to the RX1210.
16.
Pass the 1.8 m, RX to GX cable through the opening in the bottom corner of the
minipack flap and up through a cable brake. Refer to paragraph "Position of cables
in the minipack".
17.
Plug it into port RX on the receiver.
18.
Press PROG on the RX1210 to switch the receiver on.
GPS1200+
42

Advertisement

Table of Contents
loading

Table of Contents