Leica GPS1200+ Technical Reference Manual page 593

CONFIGURE
GSM/Modem AT
Command Lines
Configuration of Devices
Field Option
<Flow None or RTS/CTS Activates hardware handshake.
Control:>
Next step
IF the device is a
radio or device other
than digital cellular
phone or modem
digital cellular phone
or modem
For <GPRS/Internet: Yes> in CONFIGURE New Device, this screen consists of two pages:
GSM/CSD page:
GPRS/Internet page The AT commands configure the devices for GPRS/Internet mode.
The following table lists the fields of both pages.
Description
When the receiver/device is ready for data, it asserts
the Ready To Send line indicating it is ready to
receive data. This is read by the sender at the Clear
To Send input, indicating it is clear to send the data.
THEN
STORE (F1) to close the screen and to return to the screen from
where CONFIGURE New Device was accessed.
ATCMD (F4). Refer to paragraph "CONFIGURE GSM/Modem AT
Command Lines".
The AT commands configure the devices for normal digital cellular
phone/modem mode.
Please refer to the manual of the GPRS / Internet device for informa-
tion about which AT commands need to be entered or contact the
supplier.
GPS1200+ 593