11.2.2
Requirements
Access
Thematical coding
without codelist step-
by-step
Coding
Thematical Coding without Codelist
•
<Thematc Codes: Without Codelist> in CONFIGURE Coding & Linework.
•
A display mask with an input field for codes must be configured.
•
A display mask with an choicelist for code types must be configured.
A thematical code is typed in the field
<Code:> in a display mask of an application program.
OR
<Code:>/<Point Code:> in MANAGE New Point, Code page in data management. The
procedure is similar for lines and areas.
OR
<Point Code:> in MANAGE Edit Point: Point ID, Code page in data management. The
procedure is similar for lines and areas.
OR
in the field <Code (Auto):> in SURVEY Survey: Job Name, Auto page, if configured.
Step
Description
Thematical coding in the Survey application program is explained in this step-by-
step instruction. A typical configuration set with a display mask for coding called
Code is used.
1.
SURVEY Survey: Job Name, Code page
<Point ID:> The identifier for the point.
<Code Type:> Select if a point, line or area code will be used.
GPS1200+
241