Manage...\Data
Step
Description
•
For <Thematc Codes: Without Codelist>:
Codes for lines can be typed in but not selected from a codelist.
<Line Code:> The line code to be stored with the point. A check
is performed to see if a line code of this name already exists in the
job. If so, the according attributes are displayed.
<Attribute n:> Up to eight attribute values are available.
Type in a code.
8.
Is <Thematc Codes: With Codelist>?
•
If yes, continue with the next row.
•
If no, continue with step 9.
NEW-A (F2) allows additional attributes to be created for this line
code.
NAME (F3) or VALUE (F3)
Available for attributes for which an attribute name can be typed in.
To highlight <Attribute n:> or the field for the attribute value. The
name of <Attribute n:> can be edited and an attribute value can be
typed in.
LAST (F4) recalls the last used attribute values which were stored
with this line code.
DEFLT (F5) recalls the default attribute values for the selected code.
9.
STORE (F1) stores the new line entered and all associated informa-
tion and returns to MANAGE Data: Job Name, Lines (X) page.
GPS1200+
Refer to
chapter
189