Configuring Mapview - Leica GPS1200+ Technical Reference Manual

33.3
Description
Access step-by-step
XX
MapView Configuration,
Points page
MapView Interactive Display Feature

Configuring MapView

Allows options to be set which are used as default options within MapView. These settings
are stored within the configuration set and apply to all Map and Plot pages, regardless of
how MapView is accessed.
Any changes made in XX MapView Configuration affect the appearance of MapView in all
application programs, not just the active application program.
Step Description
1. Refer to "33.2 Accessing MapView" to access MapView in map, plot or survey
mode.
2. SHIFT CONF (F2) to access XX MapView Configuration.
CONT (F1)
To confirm the selections and to return to the
screen from where this screen was accessed.
SYMBL (F3)
To view all point symbols and their descrip-
tions.
PAGE (F6)
To change to another page on this screen.
GPS1200+ 732