Working Example - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver
Hide thumbs Also See for GPS1200+:
Table of Contents

Advertisement

19.1.6
Description
Requirements
Configuration of ID
template step-by-step
Config...\Survey Settings...

Working Example

Application:
Working technique: Real-time kinematic.
Goal:
A real-time reference is running.
For the rover: <R-Time Mode: Rover> in CONFIGURE Real-Time Mode.
Step
Description
1.
Refer to "19.1.3 Creating a New ID Template". Follow step 1. to 4.
2.
CONFIGURE New ID Template
<ID: Bolt 001>
<Increment: Numeric only>
<Increment By: 1>
<Cursor Posn: 1>
3.
CONT (F1) closes the screen and returns to CONFIGURE ID Template Library.
Pick up points with many different point ID's.
Most point ID's require an incrementing number behind a text.
The first point ID's for survey points are Bolt 001, Bolt 002, ....
A different point ID can be entered manually during the survey.
The following point ID's will be based on the manually entered point
ID.
An individual point ID can be typed in for one point.
GPS1200+
384

Advertisement

Table of Contents
loading

Table of Contents