Table of Contents
Advertisement
Measuring lines/ares
using Code Blocks
step-by-step
Coding
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Activate <Show Info: Linework> in SURVEY Configuration,
SCode page.
2.
Refer to paragraph "Creating a Code Block step-by-step" to access
SURVEY Survey: Job Name, SCode page.
3.
Create a line/area SmartCode and return to SURVEY Survey: Job
Name, SCode page.
The line/area is opened and closed using the SmartCode.
4.
To start an arc/spline move the focus on <Linework:>, the last line of
the page, and select the linework flag to be stored with the point.
5.
Move the focus on the line/area code box.
6.
OCUPY (F1), STOP (F1) and STORE (F1) to measure and store the
point with the highlighted line/area code.
GPS1200+
Refer to
chapter
11.5.2
11.5.4
11.5.3
262
Advertisement
Table of Contents
