Smartrover - External Radio - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Equipment Setup

SmartRover - External Radio

The equipment setup described below is to be used for real-time rover using SmartAntenna,

RX1250X, GHT56 and an external radio.

The RX1250X is fixed to the pole grip with the GHT56. The radio plus radio antenna attaches

to the GHT56. Connection between the SmartAntenna and the RX1250X is made via Blue-

GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-

dures may vary slightly.

Aluminium poles are used. They may be replaced with their carbon fibre equivalent

without any change to these instructions.