Config...\Interfaces... - General
Description of columns
Column
Option
Port
1, 2 or 3
BT x
Clip
NETx
Device
<Port x>
<Clip-on>
SHIFT CONEC (F4) and SHIFT DISCO (F4)
Description
The physical port P1, P2 or P3 on the instrument
which will be used for the interface functionality.
The Bluetooth port which will be used for the interface
functionality. Available for RX1250.
Clip-on-contacts on RX1250. It is used for RX1250
with GHT56 when a device is attached to the GHT56.
The logical NET port which will be used for the inter-
face functionality. Available for an activated Internet
interface.
Default device for the physical ports P1, P2 and P3.
Default device for the physical LEMO port on the
GHT56. It is displayed for RX1250 with GHT56 when
<Port: Clip-on> is selected.
GPS1200+
Available for a real-time interface configured to
use a device of type digital cellular phone or
modem. To dial the number of another station
configured in the active configuration set and to
hang up again.
475