Leica GPS1200+ Technical Reference Manual page 276

Linework and Coding
step-by-step
Linework
For <Show Codes: Only Pt Codes>
Step Field
1. <Code:>
OCUPY (F1)
STOP (F1)
STORE (F1)
Description for thematical coding
With codelist
Select a code from the
choicelist. Only point codes are
available for selection.
<None> to store a point without
code or to perform Linework
without coding.
GPS1200+
To start recording positions. The position mode
icon changes to the static icon. (F1) changes to
STOP.
To end recording of positions when enough
data is collected. When <Auto STOP: Yes> in
CONFIGURE Point Occupation Settings,
recording of positions ends automatically as
defined by the stop criteria. The position mode
icon changes to the moving icon. (F1) changes
to STORE.
To store the point information. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
Without codelist
Type in a code.
----- to store a point without
code or to perform Linework
without coding.
276