Table of Contents
Advertisement
Config...\Interfaces... - General
Field
Option
<Est Ht Qlty:> User input
<Use Device:> Yes or No
<Port:>
Bluetooth x
Port x
Port 1
Next step
IF heighting and external
angle offsets
are not to be configured
are to be configured
Description
Available for <Compute Ht: Yes>.
The estimated value for the height quality assigned to
all hidden points.
Activates the hidden point interface. For <Use
Device: No>, the measured values must be entered
manually.
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
The physical port P1, P2 or P3 on the instrument to
which the device is attached.
Available for RX1250. LEMO port on RX1250.
THEN
CONT (F1) closes the screen and returns to the screen from
where CONFIGURE Hidden Point Measurements was
accessed.
OFSET (F2). Refer to paragraph "CONFIGURE Hidden Pt
Device Offsets".
GPS1200+
541
Advertisement
Table of Contents
