Table of Contents
Advertisement
CONFIGURE
Real-Time Data Rates
Config...\Interfaces... - General
Field
Option
<Password:>
User input
<Mountpnt:>
User input
Next step
Step
Description
1.
CONT (F1) closes the screen and returns to CONFIGURE Real-Time Mode.
2.
RATES (F3). Refer to paragraph "CONFIGURE Real-Time Data Rates".
Description
For all real-time data formats, parts of the message can be output at different rates.
The settings on this screen define the output rates for the various parts of the selected real-
time data format. The available fields on this screen depend on the selected setting for <R-
Time Data:> in CONFIGURE Real-Time Mode.
Description of fields
Field
Option
<Data:>
From 0.1s to 60.0s Rates for the transmission of raw observations. The
Description
A password for authentication is required to send
data to the NTRIP Caster. Contact the NTRIP admin-
istrator for information.
Identifies from where data is streamed to the NTRIP
Caster.
Description
default settings are suitable for standard applications.
They can be changed for special applications. A
check is performed for permissible combinations.
GPS1200+
489
Advertisement
Table of Contents
