14.3.3
Description
Configuration step-by-
step
Manage...\Configuration Sets
Configuration Set for Post-Processed Kinematic Operations
Configuring the receiver for post-processed kinematic operations.
The following table provides recommendations for the most common settings. For all other
fields, the default settings can be used. Refer to the stated chapter for more information on
individual screens.
Step
Description
1.
Refer to "14.3 Creating a New Configuration Set". Follow the instruc-
tions in paragraph "Configuration step-by-step" up to step 7.
2.
CONFIGURE Real-Time Mode
<R-Time Mode: None>
3.
CONT (F1)
4.
CONFIGURE Antenna & Antenna Heights
<Antenna: AX1203+ GNSS Pole>
<Default Ht: 2.0000>
<Meas Type: Vertical>
<Moving Ht: 2.0000>
5.
CONT (F1)
6.
CONFIGURE Display Settings
Select the display masks to be used with this configuration set.
DMASK (F3) configures the selected display mask.
GPS1200+
Refer to
chapter
22.3.2
20.1
21.5
326