Leica GPS1200+ Technical Reference Manual page 195

Field procedure step-
by-step
Manage...\Data
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Create the lines F1, F2 and G1.
2. Start Survey application program for a real-time rover.
3. Press F7.
4. MANAGE Data: Job Name, Lines (X) page
The line F1 must be open, the lines F2 and G1 must be closed.
To open/close a line, highlight the line and CLOSE (F4) and OPEN
(F4).
5. CONT (F1)
6. SURVEY Survey: Job Name
Measure points along fence line F1 until the last point before P1.
These points are automatically added to line F1.
Points can be coded separately.
7. Press F7.
8. MANAGE Data: Job Name, Lines (X) page
Highlight the line F2.
OPEN (F4) to open the line.
9. Highlight the line G1.
OPEN (F4) to open the line.
Line F1 stays open.
GPS1200+
Refer to
chapter
9.2
45.3.3
45.3.3
195