Real-Time Reference Using Smartantenna, Rx1250 And Ght56 - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Equipment Setup

Real-Time Reference using SmartAntenna, RX1250 and GHT56

The equipment setup described below is to be used for real-time reference stations using

SmartAntenna, RX1250 and GHT56. This setup is intended for surveys with the need of

normal radio coverage. Raw observation data may also be collected for post-processing.

The RX1250, the radio housing for a device and the GHT56 can be assembled to make one

unit. The GHT56 clips to the tripod leg. Connection between SmartAntenna and RX1250 is

made via Bluetooth.

GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-

dures may vary slightly.

Standard radio mounted in radio housing is used throughout the instructions. Digital

cellular phones may also be used but the setup may differ slightly.

For extended operating times it is possible to power the SmartAntenna and the RX1250

simultaneously via an Y-cable with external battery.